2. On the left of the side guides at the long edge of the paper, lower the lever. Remove any paper
remaining in the tray.
3. If the end guide is stored, open the end guide shutter, then rotate the end guide to latch in the
vertical position.
a.
Pinch the lever and open the shutter (1).
b.
Hold the paper guide and pull it up (2). Pull the paper guide toward you until it clicks in place.
c.
Pinch the lever (3) and close the shutter.
Caution:
Do not hold the paper guide clip to pull up the paper guide. The guide clip can
break.
4. Load 100–500 sheets of paper with the paper edges aligned in the direction shown (1). For
preprinted media, load the paper with the printed side facing up. Hold the side guides by its grip,
then move it to touch the edges of the paper lightly (2).
183