Maintenance Assistant
Select the
Maintenance Assistant
tab to send the Xerox Remote Print Services diagnostic
information or SMart eSolutions Data on the press to Xerox Support.
Print Reports
This
Print Reports
button is enabled by the system administrator. From the various reports available,
select a report on the touch screen and then select the
Start
button to print. Some reports are only
available in the system administrator mode. From the Print Reports screen, select the desired report to
print.
Job Status
From the Job Status screen, select the desired history report to print.
•
Job History Report
: This report lists the status, attributes, input source and output destination of
every print job completed, deleted or shutdown.
•
Error History Report
: This report lists the most recent errors and faults that occurred on the press.
Printer Reports
From the
Printer Reports
screen, select
Configuration Report
. The
Configuration Report
lists the
hardware configuration, devices and software installed, and the network settings on the system such
as port and proxy settings. Print and place this report near the press for easy access to information
such as the press serial number.
Network Controller Jobs Report
Network Controller Jobs Report includes the following reports:
• Job History Report
• Error History Report
• Font List
• Configuration Report
Job Counter Report
The
Job Counter Report
is available only when from the system administrator mode. This report
identifies the total number of minutes the press has been in various operating modes, the billing
counters for various size impressions printed from each tray, and a summary of the number of jobs
printed with various page counts.
Auditron Report/Meter Report
The
Auditron Report/Meter Report
is available only when from the system administrator mode.
Note:
This
Auditron Report/Meter Report
is not applicable to a print-only system.
Faults Tab
The
Faults
tab provides a list of faults that occurred on the press. Access this tab by pressing the
Machine Status
button on the control panel and then selecting the
Faults
tab.
36