11. After removing the postcard guides, place the shutters in their original positions, then expand
them.
Note:
Hang the edges of the shutters on the beveled shutter retainers on both ends of the
adjustable side guide. Confirm that they are fixed firmly.
12. Store the postcard guides in their storage area.
Note:
Align the triangular marks so that the shutters can be mounted in the correct
orientation. In the following image, the mark on the guide at the top edge of the paper is not
visible, and the mark on the guide at the bottom edge of the paper is shown in the correct
state.
Envelope Setting
Before you load envelopes in the paper tray, read and adhere to the following envelope guidelines:
• Curled or waving edges: If there are envelopes with curled or waving edges, replace the envelopes
or straighten the edges.
• Adhered or glued to each other: If applicable, remove the glue and ensure bonding surfaces of the
envelopes do not touch.
• Glue protruded: If applicable, wipe off the glue.
• Folded or non-flat surfaces: To flatten the top surface of the pile of envelopes, do the following:
1. Place 100 envelopes on a level tabletop.
2. Press down the higher side of the top surface of the stack of envelopes.
3. When the higher side are not flattened, reduce the number of loaded envelopes until it
becomes flat.
4. Repeat the process for another 100 envelopes. For example, if you are required to prepare 300
envelopes, then perform the process three times.
176
