3. Slowly remove the dry ink/toner cartridge by placing fingers under the end of the cartridge and
gently pulling it straight out. While pulling out, hold the bottom of the cartridge with your other
hand to give it support.
Ensure that you remove the same cartridge that matches the color as indicated in the message.
4. Dispose of or recycle the cartridge per your local authorities and regulations.
In the United States, also refer to the Electronic Industries Alliance website:
. For
more information about Xerox environmental programs, go to
.
5. Remove the new dry ink/toner cartridge from its packaging.
6. Prepare the cartridge for installation:
Note:
The dry ink/toner material inside the new cartridge is compact. Loosen and
redistribute the dry ink/toner material before placing into the dry ink/toner slot.
a.
With one hand on either side of the cartridge, vigorously shake and rotate the new cartridge
up and down and then left and right for 30 seconds.
b.
Test whether the dry ink/toner material is distributed sufficiently by turning the auger on the
end of the cartridge.
c.
If the auger does not turn easily, continue to shake the cartridge and loosen the dry ink/toner
material. When the auger turns without resistance, the dry ink/toner cartridge is ready for
installation.
7. Install the dry ink/toner cartridge by aligning it straight out from the press and gently sliding in
until it stops.
260
