Xerox Versant 4100 User Documentation Download

Page: 291 / 445

1. Open the finisher front cover.

2. Pull out the

3. Discard all waste from the container.

Important:

Be sure to completely empty the container. If any waste or scraps remain, the

container becomes full before a full message displays causing a fault to occur.

4. Return

to its original position.

5. Close the finisher front cover.

PR Finisher Plus Maintenance

For information on consumable supplies and maintenance procedures for the PR Finisher Plus, refer to
the following:

291

Summary of Contents for Versant 4100






























































































































































































































































































































































































































































Search results

Summary of Contents for Versant 4100

Reviews:

Related manuals for Versant 4100

Brands by name

Popular brands

Xerox Versant 4100, User Documentation

Search results

Summary of Contents for Versant 4100

Reviews:

Related manuals for Versant 4100

Brands by name

Popular brands