Xerox Versant 4100 User Documentation Download

Page: 393 / 445

• If all paper jams are not cleared, an error message continues to display on the press touch screen.

To clear any remaining jams, refer to the press touch screen for instructions and information.

Clearing Paper Jams from Trimmer Area E1

1. Open the trimmer upper cover.

2. Open lever

downward (1), lever

downward (2) and lever

upward (3). Remove jammed

paper (4).

Note:

Check behind the upper cover for any hidden jammed paper.

393

Summary of Contents for Versant 4100






























































































































































































































































































































































































































































Search results

Summary of Contents for Versant 4100

Reviews:

Related manuals for Versant 4100

Brands by name

Popular brands

Xerox Versant 4100, User Documentation

Search results

Summary of Contents for Versant 4100

Reviews:

Related manuals for Versant 4100

Brands by name

Popular brands