Tab Stock
Guidelines for Printing on Tab Stock
Always refer to the following guidelines before using tab stock:
• Tab Stock can be printed from all trays.
• Tabs are loaded in the tray only in the long-edge feed (LEF) direction.
• Tab stock is loaded so the straight edge of the stock is in the feed direction.
• You can load single straight collated or single reverse collated tab stock.
• Refer to the print server documentation for more detailed information on how to set up a tab job
at your print server.
• If a jam occurs while running tabbed sets, cancel the job and start again.
Loading Tab Stock in Trays 1, 2, and 3
Load the tab stock LEF (portrait) and align the straight edge of the tab stock against the left edge of
the tray and with the side to be printed on facing down.
Loading Straight Collated Tabs
Load straight collated tabs with the first blank tab cutout toward the rear of the tray.
Loading Reverse Collated Tabs
Load reverse collated tabs with the first blank tab cutout toward the front of the tray.
60
