Loading Paper in Tray 5 (Bypass)
1. Slide the paper guides outward to the desired paper size.
2. Select the appropriate paper stock for your print job.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Insert the paper or media into the tray until it stops.
The Stock Wizard opens on the print server.
6. Adjust the paper guides so that they touch the edges of the stack.
Note:
Do not load materials above the
MAX
line located on the guides.
7. Scan the barcode on the stock, then to set up the stock, follow the steps in the Stock Wizard.
Note:
For details on setting up the stock in the Stock Wizard, refer to
.
M
Maattcchhiinngg tthhee TTrraayy aanndd SSttoocckk IInnffoorrm
maattiioonn
Important:
To ensure maximum productivity and successful job completion, always verify that
the Tray Properties information on the PredictPrint Media Manager application on the print
server matches the actual stock or media that is loaded in the tray being used for the print job.
Before running a print job, check for any of the following conditions:
• Modifications were made to the Stock Library, such as:
–
Adding a stock
–
Copying a stock
–
Creating a new stock
–
Editing an existing stock
• Stock or media was loaded into the selected tray for the print job
50