5. Remove the old drum cartridge by holding the finger rings provided at both ends of the drum
cartridge and gently lifting up.
Caution:
Drums are light sensitive. Do not leave the Drum Cartridge Drawer open for more
than one minute when replacing cartridges. Exposing the drum cartridges to direct sunlight
or strong light from indoor fluorescent lighting for more than one minute may cause image
quality defects.
6. Clean under drum cartridge area:
a.
With the Drum Cartridge Drawer open, look for dry ink/toner waste on the bottom of the
catch pan under the drum cartridges.
b.
Use a clean cloth to wipe down the catch pan.
7. Open the bag containing the new drum cartridge. Place the new drum cartridge near the press.
Caution:
Do not touch or scratch the surface of the drum when you take it out from the
bag.
8. Unwrap the sheet covering the new drum cartridge and place it under the cartridge.
Note:
Some drum cartridges may include a protective film. If the film is present, remove
the film on the drum cartridge.
9. Using the finger rings, install the new drum cartridge into the press with the side marked
front
facing the front.
266
