SquareFold
®
®
Trimmer Paper Path
Number
Description
1
The booklet leaves the booklet area of the finisher and enters the SquareFold
®
Trimmer device. The booklet exit sensor, in the SquareFold
®
Trimmer device,
detects the lead-edge spine of the booklet and moves the booklet to the square-
fold area.
2
Once the booklet spine reaches the square-fold area, the booklet is clamped and
the square-folding operation begins.
3
The booklet is flattened and the spine squared according to the square-fold
setting indicated on the control panel.
4
After the booklet is flattened and the spine squared, it is moved to the trimmer
area.
• Based on the finished booklet size, the booklet is moved until the trail edge
reaches the trimmer cutter.
• The trail edge is trimmed (cut); this is based on the finished booklet size
entered for the trimmer mode setting.
5
The booklet is then moved to the exit area where it is transported to the booklet
tray.
Note:
Booklets exiting the SquareFold
®
Trimmer device may contain trim remnants or scraps
from the previously trimmed booklet. This is due to static electricity build-up and is normal. If
booklets contain trim remnants or scraps, simply remove and discard them.
Square Fold and Trim Features
Square Fold Feature
Press
Square-fold
button to adjust the thickness, the square-folding, of the printed booklets.
227