www.lasertools.co.uk
Instructions
1342
Torque Wrench
3/8
"
D
Guarantee Registration Form
Distributed by The Tool Connection Ltd
Kineton Road, Southam, Warwickshire CV47 0DR
T
+44 (0) 1926 815000
F
+44 (0) 1926 815888
www.toolconnection.co.uk
If this product fails through faulty materials or workmanship, contact our service
department direct on:
+44 (0) 1926 818186
. Normal wear and tear are excluded as
are consumable items and abuse.
Guarantee
• For first time use, or after a long period without use,
adjust wrench up and down a few time to distribute
lubricant throughout the mechanism.
• Tighten in a slow and controlled manner and stop
applying pressure immediately the required setting
has been reached. Tightening too quickly will result
in an inaccurate final torque figure.
• Take care to stop applying further torque once the
desired setting has been reached. Over-torqueing
can damage the wrench.
• After using the wrench, unlock and turn the adjuster
to the lowest setting for storage. Take care not to turn
the adjuster lower that the minimum torque setting or
the mechanism may be damaged.
• Never use the torque wrench to tighten a fastener to
a higher torque than the maximum torque setting.
• Take care of the torque wrench and keep it clean; do
not store in areas of high temperature or humidity.
Please visit:
www.lasertools.co.uk/registration
for your online Guarantee Registration
Precautions
1342_INSTRUCTIONS_V12
Our warranty policy is one year from date of purchase.
Please register your date of purchase by going to:
www.lasertools.co.uk/product-registration
To register you will be asked for the following information:
Name and Address
Retailers Name and Town
Date of purchase (always keep receipt)
Part Number and Serial Number
The Serial Number can be found on your Certificate of
Conformance in accordance with ISO 6789-1.
Warranty
