b.
Return the right-side paper-feed adjustment lever to its default position by sliding it toward
the
front
of the tray.
c.
Close the tray and continue to the next step.
13. Retrieve and evaluate the printed output; choose one of the following:
• The paper is fed accurately without skew and the printed output is satisfactory; your task is
completed.
• The paper is skewed and the printed output is unsatisfactory; continue to the next step.
14. If you are still having skew adjustment problems, refer to the
. If
necessary, perform one of the following:
• Create / use an
Alignment Profile
to resolve the problem.
• Adjust the
Aligner Roll Pressure
to resolve the problem.
• Adjust the
Regi-Loop
to resolve the problem.
If the problem continues, contact the Customer Support Center.
Important:
If using an
Advanced Stock Setup
feature, always return the feature to its
default setting before using the press.
Printing on Special Media
Transparencies
Guidelines for Printing on Transparencies
Always refer to the following guidelines before using transparencies:
• For optimum system performance and image projection, use Xerox removable stripe transparency
materials. These premium transparencies are specifically designed to provide optimum print
quality.
• Use of other transparencies may cause press damage and result in excessive service calls.
• Transparencies can be printed from all trays.
• Use only transparency stock listed in the Tested Substrate List (TSL).
• Do not intermix paper with individual transparencies in a tray. Jams can occur.
• Do not load more than 100 transparencies in a paper tray at one time.
159