10. Select the
Start
button.
After the test prints complete, the [New or Existing] Profile Properties window reopens.
Note:
This screen varies depending on the selected Crease Type.
11. Obtain the printed samples from the output area of the press.
12. Measure the sample output and record the crease position values on a sheet of paper.
13. Use the
Up and Down Arrow
buttons and enter the measurement value that you obtain during
the previous step for each of the lengths measured into the appropriate window.
Note:
The number of measurement values ranges from 1-5 depending on the crease type.
14. To ensure that the crease positions are now correct, run more test prints.
15. Repeat steps – until the desired output is achieved.
16. When desired output is achieved, select
OK
to save and close the Fold Adjustment Profile.
Note:
After multiple attempts, if acceptable output cannot be achieved, select
OK
to save
and close the profile. For further assistance, contact the Customer Support Center.
PPrriinntt JJoobb SSuubbm
miissssiioonn
IInnffoorrm
maattiioonn ttoo KKnnoow
w B
Beeffoorree PPrriinnttiinngg aa JJoobb
Basic Job Workflow
The basic workflow for setting up a job and submitting it from the print server is:
1. Within the PredictPrint Media Manager on the print server, set up and define the stock properties
for the paper you will use and assign that paper to the feeder tray.
2. At the press, load the appropriate paper to be used for the job that matches the tray property
settings.
3. At the print server main window, customize your job such as inserting special pages and tabs and
create your print queue that defines the attributes of those jobs sent to the queue.
4. Submit the job file from the print server to the networked press for printing.
One of the following print servers can be used with your press:
• Xerox
®
EX 4100 Print Server, Powered by Fiery
®
• Xerox
®
EX-P 4100 Print Server, Powered by Fiery
®
PredictPrint Media Manager
Begin your job workflow at the
PredictPrint Media Manager
. The PredictPrint Media Manager is a
separate application residing on the print server desktop only and not at the press. At the PredictPrint
Media Manager main window, set up and manage the stock types, profiles associated with a stock,
the Stock Library, and the feeder tray attributes to use when printing a job.
147
