Xerox Versant 4100, User Documentation

Page: 235 / 445

9. On the Finishing tab, under Trim , select the box for Head and foot trim .
10. Use the up and down arrows to set the Finish Size of pages.
This is the distance from the top of the page to the bottom.
11. For Spine printing, select Normal .
12. Select the box for Engage fore (face trim).
13. Use the up and down arrows to set the face trim.
You can set the Finish Size, which is the distance from the spine to the right side of the page for a
right-bound booklet, or the amount of the face to be trimmed.
14. If your file has been pre-imposed, the settings are now complete and you can release the job to
print.
However, if the file is not pre-imposed, to set the imposition for the job, on the Layout tab, select
Booklet .
15. If you are not inserting pre-printed covers, proof the job now, check the output, then print the full
job.
16. To insert covers when the job is pre-imposed:
If you have an Inserter configured with your press, optionally, you can insert pre-printed cover
sheets for booklets. The size of the cover sheets should be the same as the body sheets. The
Booklet Maker wraps the pre-printed cover sheet around the body pages to form front and back
covers.
a. Load the pre-printed cover stock into the Inserter (Tray T-1).
b. From the print server, go to PredictPrint Media Manager > Stock Wizard .
c. Scan the barcode on the stock, then select Tray T1 from the Stock Wizard Load screen. To set
up the stock, follow the steps in the Stock Wizard.
Note: For details on setting up the stock in the Stock Wizard, refer to Scanning a Media
Barcode .
d. At the print server, in Job Properties, select the Media tab, then scroll down and select Define
Cover .
e. For Front Cover, select the check box, then from the drop-down menu, select Insert .
f. For Paper Source, select T1 .
g. If the cover stock is different from the body stock, set any other unique paper properties for
the cover stock. For example, the g/m
2
weight may be heavier.
h. On the Cover Media window, select OK .
i. To release the job, on the Media tab, select Print .
17. For inserting covers when the job is not pre-imposed:
a. Load the pre-printed cover stock into the Inserter (tray T-1).
The Stock Wizard opens on the print server.
b. Scan the barcode on the stock, then to set up the stock, follow the steps in the Stock Wizard.
Note: For details on setting up the stock in the Stock Wizard, refer to Scanning a Media
Barcode .
c. At the print server, select the Layout tab.
235