Note:
To prevent the system from reporting faults due to multifeeds,
temporarily
disable notifications. This allows the user to continue their workflow until the cause
of the problem is resolved. Be aware that disabling this feature has no impact on
the occurrence rate of actual multifeeds and, if disabled, multifed sheets may cause
jams elsewhere in the system and/or result in additional blank sheets in the final
output.
4. To replace the feed rolls, refer to
Replacing the Feed Rolls for Tray 6 and 7
PPaappeerr C
Cuurrll
Problem
The output contains paper curl.
Solutions
1. If your press configuration includes the Interface Decurler Module (IDM)s, confirm that the
IDM
Curl Correction
option on the IDM control panel is set to
Auto
.
For more information, refer to
Interface Decurler Module (IDM)
.
2. Change the
Paper Curl Correction
setting from the
PredictPrint Media Manager
application.
Tip:
Changing the default setting is considered a temporary solution because
environmental conditions vary from day to day. It is recommended that upon
completion of the print job you return the option to its default setting.
• Use the
Paper Curl Correction
feature to correct paper curl caused by heat and pressure and
to apply fine adjustments based on the characteristics of each paper type. Paper curl may
cause paper jams and wrinkled output.
• This feature can be found in
PredictPrint Media Manager > Stock Library > Stock Properties
> Advanced Setup > Paper Curl Correction
• From the
Paper Curl Correction
screen, select the
Edit Settings
button.
Paper Curl Correction options include
1 Sided Face Up
,
1 Sided Face Down
, or
2 Sided
.
• When changing the
Paper Curl Correction
setting, make the change by moving up or down
the available selections one at a time.
315