Multifeeds when using uncoated paper of weight 177 g/m² or heavier
When using uncoated paper of weight 177 g/m² or heavier, multifeed problems can occur.
1. To resolve the multifeed, make the following blower adjustments:
• Air Knife Blower: No change.
• Rear Lead Blower: Decrease the blower speed by three settings. For example, if the
blower speed is set at
7
, to decrease the speed by three settings, change the setting to
4
.
• Front Blower: Decrease the blower speed by three settings.
2. Run a test print. If no misfeed or multifeed occurs, the problem is resolved.
3. If a misfeed or multifeed occurs, for the Rear Lead Blower and Front Blower, do the
following:
• If a misfeed occurs, increase the blower speed by one setting.
• If a multifeed occurs, decrease the blower speed by one setting.
4. Run another test print. If the problem is not resolved, contact your Xerox representative.
368
