TE 705
Operating instructionsMode d’emploiManual de instrucciones
*313272*
313272
Printed: 07.07.2013 | Doc-Nr: PUB / 5071187 / 000 / 00
Page 1: ...TE705 Operating instructions Mode d emploi Manual de instrucciones 313272 313272 Printed 07 07 2013 Doc Nr PUB 5071187 000 00 ...
Page 2: ... 17 Outdoor Use Extension Cords When tool is used outdoors use only extension cords intended for use outdoors and so marked 18 Stay Alert Watch what you are doing Use common sense Do not operate tool when you are tired 19 Check Damaged Parts Before further use of the tool a guard or other part that is damaged should be carefully checked to deter mine that it will operate properly and perform its i...
Page 3: ...lat extra wide flat hollow channel narrow or wide scoop in standard version Chuck TE Y Chisel cutting edge adjustment to 18 positions Permanent lubrication Adjustable side handle On off switch for continuous running Electronic r p m regulation for improved operating convenience Hammering power regulation max 100 min 50 Protection class I grounded tool Service indicator with warning lamp Right of t...
Page 4: ...To remove the chisel Pull back the locking sleeve and remove the chisel Fig 3 Chisel adjustment Pull back the locking sleeve as far as it will go 1 rotate the chisel into the desired position 2 re lease the locking sleeve and the chisel engages in position 3 Fig 4 Adjust the side handle to the optimum working position Angle and axial adjustment is possible Fig 5 Hammering power adjustment Adjustth...
