Wavetronix Click 100, User Manual

Page: 28 / 260

In this chapter
˽ Installing Click Supervisor
˽ Microsoft .NET Framework
4
Once your Click devices are installed and wired, the next step is to install Click Supervi-
sor, a computer program that will help you work with your Click modules. Most Click
devices can be configured and monitored to some extent using the buttons and LEDs on
the module, but certain devices can be fine-tuned using Click Supervisor. These computer-
programmable devices include the following:
˽ Click 101 – Multi-sensor to contact closure module
˽ Click 104 – 4-channel DIN rail contact closure module
˽ Click 110 – 4-channel contact closure Eurocard
˽ Click 112/114 – Detector rack cards
˽ Click 301 – Serial to Ethernet converter
˽ Click 304 – Intelligent RS-485 to RS-232 converter
˽ Click 306 – 1-port terminal server
˽ Click 400 – Autobaud 900 MHz spread spectrum radio
˽ Click 421 – Bluetooth® to serial converter
There are also a number of Click 500 series devices that can be configured using Click Su-
pervisor; these are discussed in the Click 500 Series User Guide.
Installing Click Supervisor
4