Wavetronix Click 100, User Manual

Page: 250 / 260

CHAPTER 29
• CLICK 421 249
Computer Configuration
The Click 421 can be configured more exactly using the Click Supervisor software. See
Chapters 4 and 5 of this document for instructions on how to download and install Click
Supervisor and how to connect to your device using the software.
The Click 421 can be configured using one of two drivers (see Figure 28.3).
Figure 28.3 – Selecting a Driver
If you intend to connect from your computer to the Click 421 to a sensor, use the SmartSen-
sor driver.
To see advanced settings, use the Expert driver. This driver, which exposes every available
field for the Click 421, should only be used under the direction of Wavetronix Technical
Services.
After you have made configuration changes on a driver and saved it to the Click device, the
word “current” will appear after that driver to indicate the driver that is currently loaded
onto the device.
Note
Changing any of the settings on any driver and saving them to the Click device will
change those settings on all drivers.
The Backups option can be used to read configurations that have previously been saved to
file. See Chapter 5 for more information.