![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677051.webp)
3-4
TM-500 User’s Guide
Introduction
D292144.6.fm
The computer
Connection Status
is displayed in the lower left corner of the tab. A
green
bar indicates the connection is active. A
red
bar indicates the connection is inac-
tive. The
Connection Status
indicator monitors the following:
• The left bar indicates the
PLC
connection status.
• The right bar indicates the
Motors have been Homed
.
The current
X Axis, Y Axis,
and
Z Axis Positions
are displayed on the bottom right side of the
tab.
Each tab contains a variety of toggle buttons and open fields. A button is active when
the letter
I
(for In) appears. A button is inactive when the letter
O
(for Out) appears.
Click in any text box to open a keypad and enter the appropri-
ate value.
Control buttons or fields may appear grayed out
if that particular module is not installed or if the
field is not enabled for the current access level
by the
Super User
.
In the example on the right, the
Job, Taper, Head
and
Tube Controls
are active. The
Bowl
and
Tray Module Controls
are not installed/disabled.
Summary of Contents for TM-500
