![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677147.webp)
5-14
TM-500 User’s Guide
Preparing to Run a Pre-programmed Job
D292144.8.fm
4.
Return to the
Head Setup Tab
. Press
Move To Place
, then press
Place Part.
Check that the
Blow-off Pressure
is set correctly for the
current part.
The
Blow-off Pressure
Gauge
is located on the left side
of the
Pick Head Bridge
. If components are not dropping
properly, pull the gauge out and rotate to adjust pressure
levels. When the desired pressure level is reached, push
the gauge back in.
Summary of Contents for TM-500
