![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677152.webp)
D292144.9.fm
System Alarm Messages
Chapter 6: Troubleshooting
6-3
System Alarm Messages
During TM-500 operation, the operator will occasionally be prompted to fill the
Input Module
with parts, empty the
Reject Bin,
load or unload the
Output Module
or
check an
Inspection
fail.
When the TM-500 requires attention it will automatically stop. A beep will sound
and the
Tower Light
will turn flashing red to draw the operator’s attention.
On the HMI, a
System Alarm Message
will appear.
System Alarms
are triggered for several reasons. When the TM-500’s sensors detect an error sit-
uation such as
Low Cover Tape
or an
Empty Nest,
the
System Alarm Message
alerts the user to
the error.
System Alarms
will also appear if the TM-500 needs to be adjusted before operation
can begin. For example, if an
E-Stop
button is depressed preventing operation, the
System
Alarm
alerts the user so the situation can be resolved and operation can begin.
Summary of Contents for TM-500
