![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677061.webp)
3-14
TM-500 User’s Guide
Menus
D292144.6.fm
Accessibility
Accessibility
is used to configure which menus, settings
and controls are available to operators in the
User
and
Admin
levels. It is only available if the operator has logged
in at the
Super User
level.
Selecting
Accessibility
opens the
System Accessibility
window.
The tab menu on the left of the
System Accessibility
window allows the
Super User
to select
User Mode, Admin Mode
or
Advanced
settings for configuration. In the example above,
User
Mode
is being configured.
The tab menu at the top of the
System Accessibility
window allows the
Super User
to select
which module settings to configure for each access level. These include
Menus
and settings
tabs for any input, output and vision modules that have been installed on the TM-500. These may
include:
Bowl, Head, Job, Taper, Tray, Tube, 2D Tape, 2D Module
(Upwards Vision), and
3D
Vision.
In the example above,
Menu Access
is being configured determining which
Menus
and
Menu Options
will be accessible in
User Mode
.
Summary of Contents for TM-500
