D292144.6.fm
The Setup Screens
Chapter 3: Human Machine Interface
3-29
The TM-500’s
Tray Pitch Wizard
guides the user through the process of determining and setting
the tray pitch for a specific tray. Enter the number of columns and rows in the selected tray, then
press the
Right Arrow
button to proceed to the next
Pitch Wizard
screen.
Pitch Wizard Screen 2
The second
Pitch Wizard
screen allows the user to teach the pick position of the first pocket that
will be picked. The
Jog
buttons move the nozzle up and down, the pick head left and right and
the tray in and out. The graphic animation on the right illustrates the process.
Use the
Jog
buttons to center the nozzle over the first pocket in the tray. Press
Teach Position
One
to teach
Pick Position 1
(
Origin
) for this job. The learned position will be displayed below the
animation on the right.
Note:
The TM-500 uses the
Origin
position to automatically calculate
Reject To Tray
and
Output To Tray
positions.
Press the
Question Mark Icon
for further information. Press the
Left Arrow
button to return to
the previous step.
Once
Pick Position 1
has been taught, the third
Pitch Wizard
screen will open.
Summary of Contents for TM-500
