![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677064.webp)
D292144.6.fm
The Setup Screens
Chapter 3: Human Machine Interface
3-17
Run - Setup Tab
The
Run
Setup Tab
includes the following:
1. Job Information
The
Job Information
section lists the
Quantity
of
parts to be run and the
Job Name
.
2. Run/Stop Buttons
The
Run
and
Stop
buttons start and stop job processing. They
change color to indicate they are active as in the Setup tab
above.
3. Tab Buttons
The
Tab
buttons are displayed on the left side of the
Run Tab
screen. They
determine what is displayed in Section 4 of the
Run Tab
.
When
Setup
is selected as it is on the right, the control buttons pictured in
the example above appear connecting the user to all setup tabs.
When
2D Tape, 2D Module
and/or
3D Inspection
modules are installed,
they also appear in the tab buttons. If one of the vision modules is selected
from the tab buttons, Section 4 of the
Run Tab
displays an image of the last
inspection by that camera. Examples follow below.
1
2
3
4
5
Summary of Contents for TM-500
