![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677068.webp)
D292144.6.fm
The Setup Screens
Chapter 3: Human Machine Interface
3-21
2. Head Settings
Speed
is a percentage of the maximum velocity. It can be set
between 1-100.
Acceleration
is how rapidly the head will accelerate to reach
Head Speed
. It can be set between 1-100. The lower the
value of this setting, the more gradual the acceleration will be.
Jog Step
is the distance in millimeters that the head will move
when
Jog
is pressed.
The
Jog
buttons in the
Head Settings
section jog the head
forward or backward along the X Axis (left/right).
3. Teach Pick/Place
The
Teach Pick Position
button saves the current nozzle
position as the programmed pick location.
The
Teach Place Position
button saves the current nozzle
position as the programmed place location
Note:
Pick Position X
and
Z
values can be entered by manually moving the head and
nozzle to the desired positions. Once the nozzle is positioned, drag and drop the
Current
X
and
Current Z
values listed at the bottom of the screen into the corresponding boxes or
press the
Teach Pick Position
button.
4. Rotation Settings
Speed
is the velocity at which the nozzle rotate components.
It can be set between 1-100.
Acceleration
is how rapidly the head will accelerate to reach
Rotation Speed
. It can be set between 1-100. The lower the
value of this setting, the more gradual the acceleration will be.
Placement Rotation
buttons rotate the nozzle on the pick &
place head to rotate.
•
0
is no rotation
•
90
is a 90 degree clockwise rotation
•
180
rotates the part so it is facing in the opposite direction
•
-90
is a 90 degree counterclockwise rotation
The
Rotate
button rotates the nozzle one time to the preset
Placement Angle
.
Summary of Contents for TM-500
