D292144.4.fm
Installing Modules
Chapter 1: Assembly & Installation
1- 11
2.
Position the module so it is aligned with the correct base plate bolt holes and the tubes
will fit through the slot in the enclosure door.
3.
Use a 5mm hex wrench to screw the (2) shoulder bolts which are included through the
base of the
Tray Feeder
and into the TM-500 baseplate, attaching the module securely to
the machine.
4.
Attach the two
Tray Feeder
cables to the connections on the base
plate under the bridge.
A.
Feedback Connection
B.
Power Connection
Proceed to
Chapter 4: Machine Setup
for instructions on adjusting the feeder
to accommodate different tube sizes.
A
B
Summary of Contents for TM-500
