![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677159.webp)
6-10
TM-500 User’s Guide
System Alarm Messages
D292144.9.fm
Heat Seal Temperature Out of Range System Alarm
The
Heat Seal Temperature Controls
are located on the front of the
Taper.
When
Heat Seal
is enabled and the
Heat Shoe
temperatures are either too
hot or too cold, a
Heat Seal Temperature Out of Range
system alarm will
activate.
When this occurs,
tape advance stops, a beep sounds and a warning appears on the HMI.
To clear the
Heat Seal Temperature Out of Range
System Alarm
, wait for the heat shoes to
reach their set point and then press
CONTINUE
to clear the alarm and resume operation.
Summary of Contents for TM-500
