![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677053.webp)
3-6
TM-500 User’s Guide
Menus
D292144.6.fm
Menus
Four drop-down menus are located under the top command bar. The
File Menu
and
User Menu
appear in every HMI screen. The
System Menu
and
Vision Menu
are available in every screen
except the
Main Screen
.
Note:
The
Vision Menu
will not appear if a vision system is not installed or enabled. The
System Menu
will not appear if none of the
System Menu
options are checked in the Sys-
tem Accessibility window’s
Menus Tab
for the current user. The
Super User
controls
these settings. See the User menu and Accessibility sections which follow for further
information.
File Menu
Open:
Opens an existing job.
Save:
Save changes to the current job settings.
Save As:
Create a new job using the current settings.
Exit:
Exit out of the TM-500 HMI.
User Menu
The
User Menu
allows the user to
Login, Log Off
and
Change
Passwords
for the
Admin
and
Super User
access levels.
Login:
There are three access levels:
Super User
,
Admin
and
User
.
•
Super User
has access to all settings
and menus. The
Super User
determines
what menus and settings the
Admin
and
User
level have access to. This level
requires a login name and password. The
default login name is
SuperUser
and the
default password is
PASSWORD
.
•
Admin
access is set by the
Super User.
This level requires a login name and password.
The default login name is
Admin
and the default password is
PASSWORD
.
•
User
access is set by the
Super User.
Typically,
User Mode
is only given access to
motion controls, job quantity and start/stop job controls. This is the default mode for TM-
500 operation and does not require a login.
Log Off:
Moves the HMI out of
Super User
Mode
or
Admin Mode
and into
User Mode
.
Summary of Contents for TM-500
