Keyence FS-V20 Series Sensor Amplifiers
D291511.18a.fm
A-3
Appendix A: Sensors
Locking the Keys
It is sometimes desirable to lock the keys of the sensor amplifiers so that the currents settings
are not inadvertently changed.
1.
Hold down the
Manual
(< >) button and the
Mode
(M) button simultaneously for at least
three seconds.
2.
The
CV indicator
will display
Loc
to indicate that the lock is in place.
3.
Repeat the same procedure to unlock the keys. The display will flash the message
unL
.
Fine Tune the Setting Value (Threshold)
Use the
Manual
(< >) button to adjust the Threshold value as desired:
• Press the left arrow to increase the setting value.
• Press the right arrow to decrease the setting value.
• Hold the button down to make adjustments more quickly.
Initialization
To initialize all the settings and return the sensor to the original Keyence factory default settings,
Hold down
Set
and
L/D ON
simultaneously for at least five seconds.
Summary of Contents for TM-500
