![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677194.webp)
Keyence FS-N40 Series Sensor Amplifiers
D291511.18a.fm
A-7
Appendix A: Sensors
Initialization
To initialize all the settings and return the sensor to the original Keyence factory default settings,
follow the procedure below.
1.
Hold down
Set
and
ACT-R
simultaneously for at least three seconds.
2.
Press
Mode
(M) once.
3.
Press down the right side of the
Manual
(< >) button once.
4.
Press
Mode
(M) once.
Note:
Portions of this procedure were provided by:
KEYENCE CORPORATION OF AMERICA
500 Park Boulevard, Suite 200, Itasca,
IL 60143, U.S.A.
Phone: 1-888-KEYENCE (1-888-539-3623)
For detailed instructions, visit
www.keyence.com
and download the
Keyence Digital
Fiberoptic Sensor FS-N40 Series Instruction Manual.
Summary of Contents for TM-500
