7-2
TM-500 User’s Guide
Safe Maintenance Steps
D292144.10.fm
Safe Maintenance Steps
Follow the steps below when performing routine maintenance or cleaning on the TM-500.
1.
Turn the TM-500
OFF
.
2.
Ensure the
Main Power Switch
is rotated to the
OFF
position. The
Main Power Switch
is Lock-out/Tag-out capable. Follow your com-
pany’s Lock-out/Tag-out procedure to ensure safe maintenance.
3.
Ensure the
Air Regulator
is rotated to the
OFF
posi-
tion. The
Air Regulator
is Lock-out/Tag-out capable.
Follow your company’s Lock-out/Tag-out procedure
to ensure safe maintenance.
4.
Disconnect the air supply and place the unplugged
air hose so it is clearly visible.
5.
Disconnect the power supply and place the
unplugged power cord so it is clearly visible.
6.
Remove all carrier and cover tape from the
Taper
.
7.
Remove parts from the
Input Module
.
8.
Remove rejected parts, if any, from
Reject Bin
.
9.
Perform cleaning/maintenance as needed.
10.
Reload
Input Module
parts.
11.
Reload Taper carrier tape and cover tape.
12.
Reconnect the air supply.
13.
Reconnect the power supply.
14.
Turn the TM-500 back
ON
.
lockout/tagout hole
Summary of Contents for TM-500
