![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677176.webp)
D292144.10.fm
Maintenance
Chapter 7: Maintenance
7- 3
Maintenance
Only maintenance personnel that have thoroughly read and understand the TM-500 User’s
Guide and have several years experience operating and maintaining similar machines should be
permitted to maintain the TM-500.
Routine Maintenance Schedule
The TM-500’s simple, low-maintenance design keeps required maintenance to a minimum. The
following schedule indicates common maintenance tasks and how frequently they should be per-
formed.
Maintenance Task
Schedule
Materials needed
Vacuum or brush dust and
debris off machine, including
sensors
Daily
• soft bristled paint brush or vac-
uum
Inspect nozzle tip for wear or
damage
Daily
• To replace worn nozzle tip, call
V-TEK Service for specific noz-
zle part number.
Check and set incoming air
pressure between 80-100 psi
with the vacuum on.
Every 120 hours of operation or
as needed.
• None
Check & record vacuum levels
Every 40-80 hours of operation
• None
Clean Heat Sealer shoes
Every 40 hours of operation
• 3/32” hex wrench
• plastic or brass brush
• alcohol
Clean Loading Track
Every 40 hours of operation
• small, stiff bristled paint brush
Clean Cover Tape Guide
Every 40 hours of operation
• alcohol
• cotton swabs
Inspect Air Pressure Regulator
for moisture build-up
Every 40 hours of operation
• none
Clean PSA Sealer assembly
Every 40 hours of operation
• alcohol
• cotton swabs
Replace nozzle vacuum filter
Every 200-300 hours of opera-
tion
• nozzle vacuum filter (p/n
201032)
Remove heat shoes, replace if
necessary
Every 4 months
• Heat Shoes (p/n 261122)
Replace Tape Cutter Blade
As needed
• Cutter Blade (p/n 267760)
Perform periodic backup of com-
puter system.
As needed
• None
Summary of Contents for TM-500
