![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677081.webp)
3-34
TM-500 User’s Guide
The Setup Screens
D292144.6.fm
2D Camera Setup Tab
When the
2D Camera Tab
is selected in the
Setup
window,
the following screen appears.
The
In-Tape Inspection
button allows the user to enable or
disable the Keyence 2D Tape Vision System. Vision configu-
ration is done through the Keyence software program.
The
Pockets to Inspect
field lists the number of pockets
between the place point and the inspection point. (Include
the Inspection pocket but do not include the place
pocket.)The number of pockets will vary depending on the
pocket size.
The
Trigger Camera
button manually triggers the camera to inspect the part that is currently
under the camera. This is useful if a part needs to be retested after an inspection fail.
Summary of Contents for TM-500
