![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677092.webp)
D292144.7.fm
Tray Setup
Chapter 4: Machine Setup
4- 9
2
.
Press the center
Index Control
button to bring the
Tray Module
to the front of the
machine so it is easily accessible.
3.
Load Trays:
Load a full tray into the right side of the
Tray Module
and an empty
tray into the left side of the
Tray Module
, checking to ensure they are being placed
in the correct orientation for the job.
Pull the
Spring Loaded Tray Clamps
back to slide the trays into position.
Ensure the tray is placed so that the
front lip of the trays is under the
Stationary Tray Clamps
and the side
of the tray is pressed against the
center datums.
If the tray lip doesn’t fit under the
Stationary Tray Clamps
, loosen the
screws and adjust the clamps as
necessary.
They may be raised or lowered to
adjust to different tray thicknesses or
rotated to accommodate different
tray orientations.
Step 4:
Setup
Input
TRAY
Summary of Contents for TM-500
