![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677157.webp)
6-8
TM-500 User’s Guide
System Alarm Messages
D292144.9.fm
Tape Jam Sensor System Alarm
The
Tape Jam Sensor
is located on the
Taper Track
just
before the
Sealer
. It
detects when parts are protruding
above the top of the pocket due to a misplaced part or
tape jam.
When the
Tape Jam
sensor is enabled and a jam occurs, operation stops, a beep sounds and a
warning appears on the HMI.
Clear the tape jam and then press
CONTINUE
to clear the error message and continue opera-
tion.
Summary of Contents for TM-500
