![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677080.webp)
D292144.6.fm
The Setup Screens
Chapter 3: Human Machine Interface
3-33
5. Reject Options
This
section offers three reject choices for parts that do not pass
inspection.
•
Reject -
Rotate 180
rotates a rejected part 180
degrees and then returns it to the pocket it was origi-
nally picked from. When
Rotate 180
is selected, both
Tray 1 and Tray 2 act as input/reject trays.
•
Reject Bin.
This will place all rejected parts in the
Reject Bin
. When
Reject Bin
is selected and
Tray Out-
put
is disabled, both Tray 1 and Tray 2 act as input
trays only.
•
Reject Tray
. This will place all rejected parts in Tray 2.
When
Reject Tray
is selected, Tray 1 acts as an input/
output tray and Tray 2 acts as the reject tray.
The
Reject Tray Reset
button is only active when
Reject Tray
is the selected
Reject Option
. Clicking the
Reject Tray Reset
button clears any stored data from the last reject tray that was
loaded to ensure the first reject part will be placed in the first
pocket of the reject tray.
6. Tray To Tray Options
Enter the part thickness in millimeters in the
Part Dimension
Thickness
field.
When placing output in the tray, it is sometimes desirable to set
the
place
nozzle height slightly higher than the
pick
nozzle
height. This prevents the nozzle from pressing the part against
the pocket floor and damaging delicate leads, etc. This is known
as the
Z Axis Offset
. The recommended setting for the
Z Axis
Offset
is 1-2 mm depending on the part type and size.
7. Reflector Type
Reflector Type
indicates the type of reflector that is loaded on
the nozzle. The round nozzle reflector is the default reflector
and can be used for all standard parts. The square nozzle
reflector is used for large parts. Select
Round
or
Square
.
8. Part Type
Part Type
options include
Leaded
or
BGA
parts.
Summary of Contents for TM-500
