V-TEK TM-500, User Manual

Page: 155 / 254

6-6 TM-500 User’s Guide
System Alarm Messages D292144.9.fm
Carrier Tape Low System Alarm
If the Taper’s Low Carrier Tape Sensor detects that
the carrier tape supply has fallen below the preset
minimum level, it will trigger a
Low Carrier Tape sys-
tem alarm.
When the Low Carrier Tape system alarm is activated, tape advance stops, a beep sounds and a
warning appears on the HMI.
If the carrier tape reel is empty, load a fresh reel of carrier tape. If the carrier tape is jammed,
clear the jam and ensure that the carrier tape is loaded correctly and feeding into the Taper cor-
rectly. Press
CONTINUE to clear the error message, then press Start to continue operation.
Sensor
Rod