![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677015.webp)
Safety Warning Labels
D292144.2.fm
xii
Safety Warning Labels
The following warning labels have been placed in various places on the machine to bring safety
issues to the attention of operators and technicians working with or near the machine.
Attention
Indicates an adjustment or danger zone requiring attention.
Electrical Hazards
Indicates that hazardous voltage levels are present. Always disconnect power to
the machine before removing panels or enclosures with this warning label.
Temperature Hazards
Indicates a hot surface. Use care when working near these surfaces and allow
them to cool before performing maintenance.
Pinch Hazard
Indicates areas where moving parts or doors can pinch fingers if safety precau-
tions are not observed.
Consult Manual
Consult User’s Guide for proper procedure.
Disconnect power and air supplies and refer to
Chapter 8: Maintenance
of this
manual before performing maintenance on the Hawk.
Note:
Do not remove or obstruct any of the warning or instruction labels on the Hawk.
Summary of Contents for TM-500
