![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677090.webp)
D292144.7.fm
Input, Output & Test Options
Chapter 4: Machine Setup
4- 7
Input, Output & Test Options
The TM-500 consists of three areas which require setup when a new job is created: the
Input
area
,
the
Testing
area
and the
Output
area. Each area may be configured in a vari-
ety of ways, depending on the modules chosen for the TM-500.
The TM-500 must have an
Input
and
Output Module
installed to operate.
Test Modules
are optional, although the
EPD Sensor
is included with all machines.
Module options are listed below.
Input Module Options
• Dual Tray Input/Output
• Ionizing Fan
Output Module Options
• Dual Tray Input/Output
Note:
Tray Output is only available with Tray Input and 3D Camera options.
• Taper with Heat and PSA Sealer
• Automatic Tape Cutter
Testing Module Options
• Empty Pocket Detection (EPD) Sensor
• 2D Vision for in-tape Mark and Orientation Inspection
Note:
This chapter covers the machine setup for the
Input
and
Output Modules
and the
EPD
Sensor
. For setup and configuration instructions for the optional
Inspection Modules
,
proceed to
Chapter 6: Vision/Test Setup & Operation
.
Step 4:
Setup
Input
OPTIONS
Summary of Contents for TM-500
