![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677109.webp)
4-26
TM-500 User’s Guide
Setup Vision Test (Optional)
D292144.7.fm
Setup Vision Test (Optional)
Note:
In order to use the Keyence IV Vision System, the camera must be configured and
set to
Run Mode
in the Keyence HMI as well as being enabled on the TM-500 HMI.
Please complete the following instructions to correctly configure the vision system.
1.
Select the
2D Tape Tab
from the
Tab Menu
.
2.
Under
Vision Settings
, turn
In-Tape Inspection
ON
( I )
. Ensure the
Pockets to Inspect
field is correct.
3.
To select a stored inspection or configure a new inspection, open the
Keyence
Inspection System
software by double-clicking on the
IV Navigator
icon on the
desktop. Then select
Network Connection
.
Step 6:
Setup
Vision
Summary of Contents for TM-500
