![background image](http://html2.mh-extra.com/html/v-tek/tm-500/tm-500_user-manual_3085677050.webp)
D292144.6.fm
Introduction
Chapter 3: Human Machine Interface
3-3
There are multiple ways to reach each HMI screen. With the single exception
of the
Main Screen
, every screen has a list of tabs that lead to configuration
settings for job, pick head and all installed input, output and inspection mod-
ules.
The active tab is indicated by a
red
line on the left of the tab button. In the
example on the right, the
Tray Tab
is selected. Only the tabs for
Job
,
Head
,
Run
and the currently installed
Input
,
Output
and
Inspection
modules will
appear on the tab menu. In the example on the right, the input is
Tray
, the
output is to
Taper
and there are
2D Tape
and
Upwards 2D Inspection
mod-
ules installed.
Each tab has a
Tab Menu
on the left which will take the user to the other active HMI
screens.They also include a variety of drop-down menus on the top of the screen. The
Tray Tab
is pictured below.
Drop-down Menus
Current X,Y, & Z Axis Position
Connection Status
Summary of Contents for TM-500
