Triumph Tiger Explorer XR 2016, Service Manual

Page: 636 / 750

Note
This model is equipped with an Engine Management System (EMS) relay only.
The starter, fuel pump, cooling fan, lighting, windscreen adjustment motor, Triumph Semi Active
Suspension (if fitted), and accessory systems are all controlled by the chassis ECM.
The EMS relay is located beneath the rider’s seat, forward of the battery. To gain access to the relay:
Remove the rider’s seat (see Rider’s Seat - Removal).
Remove the battery (see Battery Removal).
cjld
1
Engine Management System (EMS) relay 1.
If a fuse fails during operation, inspect the electrical system to determine the cause, and then replace it with a
new fuse of the correct current rating.
A blown fuse is indicated when all of the systems protected by that fuse become inoperative. When checking for
a blown fuse, refer to Fuse Identification to establish which fuse has blown.
WARNING
Always replace blown fuses with new ones of the correct current rating (as specified on the fuse box cover)
and never use a fuse of higher rating.
Use of an incorrect fuse could lead to an electrical problem, resulting in motorcycle damage, loss of
motorcycle control and an accident.
Main Fuse
The 40 Amp main fuse is located beneath the rider’s seat and behind the seat bridge.
To allow access to the main fuse, the rider’s seat must be removed.
1
Tiger Explorer XR Series
632 of 746
ELECTRICAL