Triumph Tiger Explorer XR 2016, Service Manual

Page: 82 / 750

Refit the breather cover, installing new M6 x 16 mm and M6 x 35 mm encapsulated fixings as noted during
removal. 3.
Tighten the new fixings in the sequence shown below to 11 Nm . 4.
cige
7
6
3
1
5
4 2
Breather Cover Tightening Sequence
Refit the alternator (see Alternator - Installation).
Sump - Removal
WARNING
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
Remove the rider’s seat (see Rider’s Seat - Removal).
Disconnect the battery, negative (black) lead first.
WARNING
Prolonged or repeated contact with engine oil can lead to skin dryness, irritation and dermatitis. In addition,
used engine oil contains potentially harmful contamination which can cause cancer. Wear suitable clothing
and avoid skin contact.
The engine oil and filter must be replaced in accordance with scheduled maintenance requirements.
WARNING
If the engine has recently been running, the engine oil will be hot to the touch. Contact with the hot oils may
cause damage to exposed skin. To avoid skin damage, do not touch hot oil.
WARNING
If the engine has recently been running, the exhaust components may be hot to the touch. Contact with the
hot components may cause damage to exposed skin. To avoid skin damage, always allow the hot parts to
cool before working on the exhaust system.
Drain the engine oil (see Oil and Oil Filter Change).
Remove the exhaust system (see Exhaust System - Removal).
Tiger Explorer XR Series
78 of 746
ENGINE COVERS