Triumph Tiger Explorer XR 2016, Service Manual

Page: 716 / 750

WARNING
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
Remove the rider’s seat (see Rider’s Seat - Removal).
Disconnect the battery, negative (black) lead first.
Remove the windscreen motor (see Windscreen Motor - Removal).
1.
Disconnect the electrical connector from the instruments. 2.
Remove the three fixings and release the instruments from the bracket bayonet fixings. Collect the washers. 3.
cjlh
2
1
1
3
Fixings 1.
Electrical connector 2.
Instruments 3.
Headlight Adjustment
WARNING
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
Position the instruments to the bracket. 1.
Insert the bayonet fixings into the grommets. Fit the washers and fixings and tighten to 3 Nm . 2.
Connect the electrical connector to the instruments. 3.
2
1
1
3
Tiger Explorer XR Series
712 of 746
ELECTRICAL