Triumph Tiger Explorer XR 2016, Service Manual

Page: 85 / 750

Water pump drain tube 1.
O-rings 2.
Thoroughly clean the sump. 2.
Incorporating a new sump gasket, position the sump to the lower crankcase. 3.
Tighten the sump fixings in the following sequence: 4.
Tighten the fixings in the sequence shown below to 12 Nm .
Tighten fixings one, two, three and four again to 12 Nm .
chhd
16
17
15
11
7
3
14
10
6
2
12
8
4
13
9
5
1
Sump Tightening Sequence
Note
Use new exhaust gaskets at the downpipe connections with the cylinder head.
Refit the exhaust system (see Exhaust System - Removal). 5.
Note
For models fitted with engine bars as standard, the lower front mounting point of the harness guide
is secured with a fir tree clip instead of a bolt.
Refit the harness guide and secure with the scrivet, new bolt(s) and new fir tree clip (if fitted). Tighten the
bolt(s) to
3 Nm .
6.
1
4
3
2
Tiger Explorer XR Series
81 of 746
ENGINE COVERS