Triumph Tiger Explorer XR 2016, Service Manual

Page: 591 / 750

Rider’s seat front mounting 1.
Fuel drain hose 2.
Multiplug 3.
Fixings 4.
Place the seat mounting and IMU assembly on a flat surface, in a location that is isolated from shock and
vibrations caused by other workshop processes. 5.
Sump Guard - Removal
WARNING
Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it
from falling and causing injury to the operator or damage to the motorcycle.
CAUTION
The Inertial Measurement Unit (IMU) located beneath the seat bridge is a highly sensitive device. Exposure
to excessive shock and vibration can cause permanent damage to IMU internal components.
Care must be taken when removing or installing the seat bridge, not to expose the IMU to excessive shock or
vibration. When releasing or tightening the fixings, use suitable hand tools only. Do not use air or battery
powered tools.
Do not drop the IMU. An IMU that has been dropped will be irreparably damaged and must be replaced.
Position the seat bridge to the frame and secure with the four fixings. Using a suitable hand tool, tighten the
fixings to
5 Nm .
1.
Reconnect the multiplug for the IMU. 2.
Attach the fuel drain pipe to its clips on the seat bridge as noted during removal. 3.
cjjw
3
4
4
1
2
Seat bridge 1.
Fuel drain hose 2.
Multiplug 3.
Fixings 4.
Refit the fuel tank (see Fuel Tank - Installation).
Sump Guard - Installation
Tiger Explorer XR Series
587 of 746
FRAME / BODYWORK