Texas Instruments TM4C1294NCPDT, Datasheet

Page: 1665 / 1890

Register 8: Analog Comparator Control 0 (ACCTL0), offset 0x024
Register 9: Analog Comparator Control 1 (ACCTL1), offset 0x044
Register 10: Analog Comparator Control 2 (ACCTL2), offset 0x064
These registers configure the comparator's input and output.
Analog Comparator Control n (ACCTLn)
Base 0x4003.C000
Offset 0x024
Type RW, reset 0x0000.0000
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
reserved
RO RO RO RO RO RO RO RO RO RO RO RO RO RO RO RO Type
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Reset
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
reserved CINV ISEN ISLVAL TSEN TSLVAL reserved ASRCP TOEN reserved
RO RW RW RW RW RW RW RW RO RW RW RW RO RO RO RO Type
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Reset
Description Reset Type Name Bit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation. 0x0000.0 RO reserved 31:12
Trigger Output Enable
Description Value
ADC events are suppressed and not sent to the ADC. 0
ADC events are sent to the ADC. 1
0 RW TOEN 11
Analog Source Positive
The
ASRCP
field specifies the source of input voltage to the VIN+ terminal
of the comparator. The encodings for this field are as follows:
Description Value
Pin value of
Cn+
0x0
Pin value of
C0+
0x1
Internal voltage reference (V
IREF
) 0x2
Reserved 0x3
0x0 RW ASRCP 10:9
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation. 0 RO reserved 8
Trigger Sense Level Value
Description Value
An ADC event is generated if the comparator output is Low. 0
An ADC event is generated if the comparator output is High. 1
0 RW TSLVAL 7
1665 June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller