Teledyne T101, Operation Manual, Page: 78 / 375

Operating Instructions Teledyne ML – T101 Operation Manual
74
4.4.5. SETUP – PASS: PASSWORD PROTECTION
The menu system provides password protection of the calibration and setup functions to
prevent unauthorized adjustments. When the passwords have been enabled in the
PASS
menu item, the system will prompt the user for a password anytime a password-protected
function (e.g., SETUP) is selected. This allows normal operation of the instrument, but
requires the password (101) to access to the menus under SETUP. When PASSWORD is
disabled (SETUP>OFF), any operator can enter the Primary Setup (SETUP) and
Secondary Setup (SETUP>MORE) menus. Whether PASSWORD is enabled or disabled,
a password (default 818) is required to enter the VARS or DIAG menus in the
SETUP>MORE menu.
Table 4-6. Password Levels
PASSWORD LEVEL MENU ACCESS ALLOWED
Null (000) Operation
All functions of the main menu (top level, or
Primary, menu)
101
Configuration/Maintenance Access to Primary and Secondary SETUP
Menus when PASSWORD is enabled
818
Configuration/Maintenance Access to Secondary SETUP Submenus VARS
and DIAG whether PASSWORD is enabled or
disabled.
To enable or disable passwords, press:
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE EXIT
SAMPLE RANGE=xxx.x PPX [GAS]= xxxx
<TST TST> CAL SETUP
SYSTEM PASSWORD ENABLE: OFF
OFF ENTR EXIT
SETUP X.X PASSWORD ENABLE: ON
ON ENTR EXIT
Toggle OFF to ON
to enable, and ON
to OFF to disable
password feature
EXIT discards the new
setting
ENTR accepts the new
setting
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE EXIT
SAMPLE RANGE=xxx.x PPX [GAS]= xxxx
<TST TST> CAL SETUP
Press ENTR to
accept new
password, then
EXIT the
PRIMARY SETUP
MENU so that
selecting SETUP
now prompts for
the password.
SAMPLE ENTER PASSWORD:0
0 0 0 ENTR EXIT
Toggle to change
password