Teledyne T101, Operation Manual, Page: 329 / 375

Teledyne API T/E-Series Models 101, 102, and 108 Software Documentation (PN05492D DCN6485)
A-35
58 Sample pressure “Hg
60 Internal box temperature

C
62 High voltage power supply output Volts
64 Diagnostic test input (TEST_INPUT_8) mV
66 Diagnostic test input (TEST_INPUT_11) mV
68 Diagnostic temperature input (TEMP_INPUT_4)

C
70 Diagnostic temperature input (TEMP_INPUT_5)

C
72 Diagnostic temperature input (TEMP_INPUT_6)  C
74 Ground reference (REF_GND) mV
76 4096 mV reference (REF_4096_MV) mV
78 Pre-amplified UV lamp intensity reading mV
80
1
Converter temperature

C
82
5
Oxygenator flow rate cc/m
84
6
Concentration stability #2 PPB
86
7
UV lamp stability mV
100
4
TRS slope for range #1 PPB/mV
102
4
TRS slope for range #2 PPB/mV
104
4
TRS offset for range #1 mV
106
4
TRS offset for range #2 mV
108
4
TRS concentration for range #1 during zero/span
calibration, just before computing new slope and offset
PPB
110
4
TRS concentration for range #2 during zero/span
calibration, just before computing new slope and offset
PPB
112
4
TRS concentration for range #1 PPB
114
4
TRS concentration for range #2 PPB
116
4
TRS converter efficiency factor for range #1 —
118
4
TRS converter efficiency factor for range #2 —
MODBUS Floating Point Holding Registers
(32-bit IEEE 754 format; read/write in high-word, low-word order; read/write)
0 Maps to
SO2_SPAN1
variable; target conc. for range #1 Conc. units
2 Maps to
SO2_SPAN2
variable; target conc. for range #2 Conc. units
4 Maps to
H2S_SPAN1
variable; target conc. for range #1 Conc. units
6 Maps to H2S_SPAN2 variable; target conc. for range #2 Conc. units
100
4
Maps to
TRS_SPAN1
variable; target conc. for range #1 Conc. units
102
4
Maps to TRS_SPAN2 variable; target conc. for range #2 Conc. units
MODBUS Discrete Input Registers
(single-bit; read-only)
0 PMT detector warning
1 UV detector warning
2 Dark calibration warning
3 Box temperature warning
07266B DCN6485